PRODUCT CENTER
BK 105
Category:
Keywords:
BK 105
Consultation E-mail: hbfn2002@163.com
MessageProduct Overview
Product details
Technical Features:
Control valve: through type, bearings at both ends can rotate flexibly and smoothly, long service life. Heavy load & high pressure : oil pressure of 17Mpa can be applied to HCV with front axle load of 9.5T. Seal: high and low temperature resistant (- 40 ℃ ~ 120 ℃) seal is adopted, which is suitable for severe working conditions of extremely cold and extremely hot. Relief valve: integrated pressure relief valve and one-way valve to provide system protection and ensure driving safety during emergency steering. Cosine gear ratio: smooth and light effort for static and low-speed steering, good high-speed handling stability, obvious road feeling and good response linearity. Straight tooth & eccentric design : no obvious neutral idle stroke, good turning accuracy, high transmission efficiency, sufficient driving confidence.
|
Cylinder Diameter |
105 |
|
Input Spline |
1×79 |
|
Output Spline |
2×48” |
|
Max Pressure |
15MPa |
|
Output Torque |
3875～4555 Nm |
|
Gear Ratio |
16.40～19.28 |
|
Output Angle |
±47° |
|
Total Turns |
4.6 |
|
Unloading Angle |
30°- 45° |
Welcome to leave a message for consultation, we will contact you promptly!